Header tank before polishing.

Inside of the diff breather. Stainless filtering medium is held in by perforated mesh for dual filtering. Not fitted in this pic.

The diff air/oil separator ready to fit.

Thermostat housing we made for the injected 302 windsor.

These are the dual engine air/oil separators. Two pipes from each tappet cover.

They are our triple filter design

The engine & transmittion oil coolers we fabricated. Thermostat for driving in winter time. Keeps the temp. above 82 deg. c. all the time.

We incorporated the side band to mount plate brace into the one piece.

Unusual reflective pic. of the bottom mount plate. Shows our welding.