Aluminium Radiators & Engineering Pty Ltd
Unit 11/ 60 Kremzow Rd
BRENDALE  QLD  AUSTRALIA   fax. no.(07) 3205 4691
Ph +61 (07) 3205 4620


Radiator Options


If your Sylvia,180sx or Skyline GTS25 radiator looks like this, then read on. If you have a cracked top tank, then read on. If your temperature gauge is reading high after fitting that big front mount, then read on. If you want peace of mind, or a trick radiator, you're here.



We use a new Australian manufactured core, you're own bottom tank (which because of the less heat at the bottom of the radiator, outlasts top tanks by at least 2 to 1), & fabricate our own top tank.



The result is a trick looking radiator that increases heat dissipation by just over  50%   & actually is within  9.2%   cooling capacity of a twin turbo HR33GTR OE> radiator. All this for just  $688-00.



Same pride & workmanship as all our products.




Here you can see where all the extra cooling comes from. Our radiator core on the left is 29mm thick as against the oe core on the right, at just 19mm thick.

An optional extra cost is to make it in the new dimple wall tube for an extra  8% increase.

We are trying to procure a batch of new bottom tanks so we can supply a complete new radiator, no exchange needed.



© Aluminium Radiators and Engineering Pty Ltd (ARE Cooling) - while every effort is made to ensure details and information is correct at time of publishing (May 18, 2009)
please contact ARE by phone, fax or email to confirm prices before order.